8 ports 10/100Mbps Optical Ethernet Switch AND 1 PORT single mode FIBER Power Over Ethernet Switch

Main Features:

This fiber media converter is conversion between Ethernet interface and optical interface
8 10/100 Mbps Ports with RJ45 Auto Uplink+ 1 Fiber Uplink port, SC, single fiber
Extend the transmission distance from 100m to 2km(multimode fiber) or 20km(single mode fiber)
Supply power to wireless access points and surveillance cameras over Cat-5 cabling
Supports PoE IEEE 802.3af compliant PDs
Supports IEEE 802.3 10Base-T& IEEE 802.3u 100Base-TX standard
Supports PoE power up to 15.4W for each PoE port
Supports PoE power up to 124W for all PoE ports
Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
Support port auto MDI/MDIX
Support lightning protection (9 port reach two levels of lightning)
1K entry MAC address table of the PoE Switch with auto-learning and auto-aging
LED indicators for monitoring power, link, activity and speed
External power adapter supply

Technical Parameter:

Model number	FLA-PJ800D
Optical interface
Type	SC/FC/ST 100Mbps ( Single fiber)
Multimode	50/125,62.5/125μm (max 2km)
Single mode	8/125,8.7/125,9/125,10/125μm (max 20km)
Network Ports	8 10/100Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX
Transmission Method	Store-And-Forward
Network Media	10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
Performance Specifications	Bandwidth:1.6 Gbps Network latency:Less than 20 μs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission Buffer memory:96 KB embedded memory per unit Address database size:1,000 media access control (MAC) addresses per system Addressing:48-bit MAC address Mean Time Between Failure (MTBF):190,000 hours (~ 21 years) Acoustic Noise: 0 dB
Network Protocol and Standards	IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX
Status LEDs	System: Power, PoE Maximum Power Per Port: Link, Activity, Speed, PoE Active, PoE Fa
Power Supply	Total Power Consumption: 60 W maximum PoE Watt budget: 56W IEEE802.3af Power Consumption: 56 W maximum (Ports 1 – 4) 48VDC, 1.25A power output; plug is localized to country of sale
Environmental Specifications	Operating temperature: 0 to 55° C Storage temperature: -20 to 75°C Operating humidity: 90% maximum relative humidity, non-condensing Storage humidity: 95% maximum relative humidity, non-condensing Operating altitude: 10,000 ft (3,000 m) maximum Storage altitude: 10,000 ft (3,000 m) maximum
Packed Dimension	*281610CM*
Gross weight	1.5kg
Package included	8-PORT 10/100 SWITCH WITH 8-PORT POE+1port fiber Optical uplink AC Adapter Wall-mount kit Installation guide Warranty/Support Information card